Save - Agilent Technologies PSA Series User And Programming Manual

Instrument Functions: A - L
File
2.6.1.3 Dir Up
Moves up one subdirectory level within a directory. If your position is in the top level of the
drive already, it moves up to the drive level and the current drive is highlighted (A: or C:).
Key Path: ,
File Catalog
2.6.1.4 Dir Select
Selects the drive or directory that is highlighted on the display. You can use the up and
down arrows to select and highlight the desired drive or directory. If the top entry in the
catalog has a ". ." indication, you are in a subdirectory, and this key acts the same as the
key. When you are at the top directory level, this key moves up to the drive level.
Up
Key Path: ,
File Catalog

2.6.2 Save

Displays menu keys that enable you to save files to the floppy (A:) or internal (C:) drive.
The menus allow you to fill in data-entry fields for file name, type, format, source, and
path (directory). Some fields may be blank depending on file type.
The catalog list box is active and can be used for selecting the directory in which to save
the file. Saved files that match the current
always , .
Down By Date
Never remove the floppy disk during a save operation. To do so could corrupt
NOTE
all data on the floppy disk.
Saving directly to floppy drive A:\ can be slow. Try saving first to internal
drive C:\ and then transfer the file to the floppydrive.
Many errors can be generated by a bad
NOTE
'Unable to Save file' message is seen, you should check the error queue
( ,
System Show Errors
You can press the front-panel
NOTE
automatically generated file name. The current
as though
120
Type
) for the source of the error.
Save
had been pressed.
Save Now
and are shown. The
Format
operation. For this reason, if an
Save
key to immediately save a file using an
parameters will be used,
Save
Dir
is
Sort Order
Chapter 2