Agilent Technologies PSA Series User And Programming Manual page 130

Instrument Functions: A - L
File
2.6.3.4 Destination
When is set to
Type Trace
for a single-trace file. If the data is for all three traces (
3
saved), the data will be returned to the original trace registers, regardless of the
setting.
When is set to
Type Limits
Key Path: ,
File Load
State Saved: Not saved in Instrument State.
Factory Preset: Trace file format, is All Traces at power on.
2.6.3.4.1 Trace 1
Selects trace 1 for the trace data to be loaded into.
Key Path: ,
File Load
State Saved: Not saved in Instrument State.
Factory Preset: Not affected by
2.6.3.4.2 Trace 2
Selects trace 2 for the trace data to be loaded into.
Key Path: ,
File Load
State Saved: Not saved in Instrument State.
Factory Preset: Not affected by
130
, allows you to direct your data to
Destination
, allows you to direct your data to
Destination
,
Destination
. Power up and
Preset
,
Destination
. Power up and
Preset
,
Trace 1
was when they were
Source All
Limit 1
sets
Restore Sys Defaults
sets
Restore Sys Defaults
, or
Trace 2 Trace
Destination
or .
Limit 2
.
Trace 1
.
Trace 1
Chapter 2