Remote Command:
:DISPlay:WINDow:TRACe:Y:DLINe <ampl>
:DISPlay:WINDow:TRACe:Y:DLINe?
:DISPlay:WINDow:TRACe:Y:DLINe:STATe OFF|ON|0|1
:DISPlay:WINDow:TRACe:Y:DLINe:STATe?
Example:
:DISP:WIND:TRAC:Y:DLIN -32 dBm
:DISP:WIND:TRAC:Y:DLIN:STAT OFF
2.5.4 Active Fctn Position
Selects the screen position for the Active Function Display. Depending on the type of trace
date being viewed, you can move the Active Function Display position for less visual
interferance with your screen data.
Key Path:
Display
Readback:
The selection of the position to display the active function (Top, Center,
Bottom) reads back to line 3 of this key.
State Saved:
Not saved in instrument state, survives power cycle and preset.
Factory Preset: No effect, persistent variable, survives power cycle and preset.
Factory Default: Center. Pressing
History:
Added with firmware revision A.04.00
Remote Command:
:DISPlay:AFUNction:POSition BOTTom|CENTer|TOP
:DISPlay:AFUNction:POSition?
Example:
:DISP:AFUN:POS BOT
Chapter 2
,
System
Restore Sys Defaults
Instrument Functions: A - L
will reset to factory defaults.
Display
93