Agilent Technologies PSA Series User And Programming Manual page 246

Instrument Functions: P - Z
System
Default:
Mode
Remote Command:
See "Preset Type" on page 245.
SYST:PRES[:USER]:SAVE saves the current state to be used as the preset
Example:
user state.
SYST:PRES:TYPE USER defines the type of preset as the user preset.
With user preset selected, and a user state saved, use SYST:PRES to do a
user preset.
4.9.2.2.2 Mode
Sets the preset type to "Mode." When you do a preset, the current mode factory default
instrument state will be restored. A mode preset does not change the mode. Refer to
for more information.
"Preset" on page 211
Key Path:
System
Readback: Mode
Annunciation/
Annotation: None
Dependencies/
Couplings: None
State Saved: Survives
SCPI Status Bits/
OPC Dependencies: None
Factory
Default:
Mode
Remote Command:
:SYSTem:PRESet:TYPE
SYST:PRES:TYPE MODE defines the type of preset as the mode preset.
Example:
After you have selected mode as the preset type, use SYST:PRES to do a
mode preset.
246
, ,
Power On/Preset Preset Type
and power cycle, but no saved in Instrument State.
Preset
See "Preset Type" on page 245.
Chapter 4