Instrument Functions: M - O
Marker
:CALCulate:MARKer[1]|2|3|4:X:SPAN?
Returns the spacing of the markers in frequency.
Example:
CALC:MARK3:MODE SPAN selects marker 3 and sets it to
CALC:MARK4:X:POS:SPAN 200 sets the spacing between the markers to
200 trace points for marker pair 4.
CALC:MARK2:X:POS:CENT 300 sets the midpoint between the markers to
the 300th trace point from the left of the display. For a 601 point trace this
will be the middle of the display.
Off
3.1.6
Turns off the selected marker. In addition,
marker such as
Signal Track
annotation from the display.
Key Path:
Marker
Remote Command:
See
"Select Marker" on page 169
Example:
CALC:MARK3:STAT OFF selects marker 3 and sets it to
174
turns off functions related to the selected
Off
,
, and
Band/Intvl Power
for the command to select the control mode.
Span Pair
and removes marker
Marker Noise
Off
.
.
Chapter 3