Display Line - Agilent Technologies PSA Series User And Programming Manual
Spectrum analyzers
Hide thumbs
Also See for PSA Series:
- Service manual (436 pages) ,
- Manual (382 pages) ,
- Getting started manual (82 pages)
Table of Contents
Advertisement
Instrument Functions: A - L
Display
2.5.2 Display Line
Activates an adjustable horizontal line that is used as a visual reference line. The line has
an amplitude value that corresponds to its vertical position relative to the reference level.
The value of the display line appears on the left side of the display below the label Dl. The
display line can be adjusted using the step keys, knob, or numeric keypad. The units of
Display Line are determined by the
Key Path:
Display
State Saved:
Saved in instrument state.
Factory Preset: –25 dBm, Off
Factory
Default:
–25 dBm, Off
Terminators:
dBm, mV, uV
− 370 dBm to 30 dBm
Range:
Remote Command:
:DISPlay:WINDow:TRACe:Y:DLINe <ampl>
:DISPlay:WINDow:TRACe:Y:DLINe?
:DISPlay:WINDow:TRACe:Y:DLINe:STATe OFF|ON|0|1
:DISPlay:WINDow:TRACe:Y:DLINe:STATe?
Example:
:DISP:WIND:TRAC:Y:DLIN -32 dBm
:DISP:WIND:TRAC:Y:DLIN:STAT OFF
2.5.3 Display Line
Activates an adjustable horizontal line that is used as a visual reference line. The line has
an amplitude value that corresponds to its vertical position relative to the reference level.
The value of the display line appears on the left side of the display below the label Dl. The
display line can be adjusted using the step keys, knob, or numeric keypad. The units of
Display Line are determined by the
Key Path:
Display
State Saved:
Saved in instrument state.
Factory Preset: –25 dBm, Off
Factory
Default:
–25 dBm, Off
Terminators:
dBm, mV, uV
− 370 dBm to 30 dBm
Range:
92
setting under
Y-Axis Units
setting under
Y-Axis Units
.
Amplitude
.
Amplitude
Chapter 2
Advertisement
Table of Contents
