Agilent Technologies PSA Series User And Programming Manual page 89

Key Path:
Det/Demod
History: Added with firmware revision A.6.0
Remote Command:
See "Detector" on page
Example:
DET MPOS
2.4.1.11 RMS (Remote Command Only)
Selects the Average Detector. If
yield the RMS voltage (average power) for each trace point. (See 3.4.1.3, Average)
Key Path: There is no key selection for this setting, but you can access it by using
Average Detector
Remote Command:
See "Detector" on page
Example:
DET RMS
Chapter 2
79.
,
BW/Avg Avg/VBW Type
(see "Average" on page
79.
Instrument Functions: A - L
is set to (or
Auto Pwr Avg
83).
Det/Demod
) this will
89