Y Axis Units - Agilent Technologies PSA Series User And Programming Manual

Remote Command:
See "Presel Adjust" on page
2.1.7.2 External
Selects the external mixer preselector.
Key Path:
AMPLITUDE / Y Scale
Dependencies/
Couplings: It is only available if Option AYZ is installed.
•
It is grayed out if external mixing is off. Error 232 is sent.
•
It is grayed out if you are using external mixing and have specified an
•
unpreselected external mixer. Error 230 is sent.
History:
Added in revision A.06.00.
Remote Command:
See "Presel Adjust" on page

2.1.8 Y Axis Units

Displays the menu keys that enable you to change the vertical (Y) axis amplitude units.
The analyzer retains the entered
scale types. For example, if
pressing
Scale Type (Log)
you set to
Y Axis Units
again sets the Y Axis units back to dBm.
Scale Type (Log)
This key is unavailable (grayed out) when the FM Demod View is on.
, in conjunction with the
Y Axis Units
markers, and over the remote interface. When using the remote interface no units are
returned, so you must know what the Y-Axis units are to interpret the results:
Key Path:
AMPLITUDE / Y Scale
State Saved: Saved in Instrument State
Factory Preset: For
Scale Type (Log)
For
Scale Type (Lin)
Chapter 2
38.
,
Presel Adjust
38.
Y Axis Units
has been set to
Scale Type
sets the
Y Axis Units
, pressing
Volts Scale Type (Lin)
Scale Type
= dBm
= Volts
separately for both Log and Lin amplitude
, and you set
Log
to . If has been set to Lin and
dBm Scale Type
sets the
Y Axis Units
, affect how the data is read off the display,
Instrument Functions: A - L
AMPLITUDE / Y Scale
to ,
Y Axis Units dBm
to . Pressing
Volts
41