4.9.5.7.2 SCPI Socket
Turns on/off the capability of establishing Socket LAN sessions. This allows you to limit
SCPI access over LAN via socket sessions.
Key Path:
System
Survives
State Saved:
SCPI Status Bits/
OPC Dependencies: None
Factory
Default:
On (Reset by
Remote Command:
:SYSTem:COMMunicate:LAN:SCPI:SOCKet:ENABle OFF|ON|0|1
:SYSTem:COMMunicate:LAN:SCPI:SOCKet:ENABle?
Example:
SYST:COMM:LAN:SCPI:SOCK:ENAB ON
4.9.5.7.3 SICL Server
Turns on/off the SICL server capability, enabling you to limit SCPI access over LAN via the
SICL server. (SICL IEEE 488.2 protocol.)
Table 4-1
SCPI Default Settings
Parameter
Maximum Connections
Instrument Name
Instrument Logical Unit
Emulated GPIB Name
Emulated GPIB Logical Unit
Emulated GPIB Address
Chapter 4
,
SCPI Lan
and power cycle, but not saved in Instrument State.
Preset
,
System
Restore Sys Defaults
Description
The maximum number of connections that can be accessed
simultaneously
The name (same as the remote SICL address) of your
analyzer
The unique integer assigned to your analyzer when using
SICL LAN
The name (same as the remote SICL address) of the device
used when communicating with your analyzer
The unique integer assigned to your device when it is being
controlled using SICL LAN
The emulated GPIB address assigned to your transmitter
tester when it is a SICL server (the same as your GPIB
address)
Instrument Functions: P - Z
.)
System
Setting
5
inst0
8
gpib7
8
18
261