Table of Contents
Advertisement
SONET_Usr.bk Page 158 Wednesday, December 13, 2000 11:11 AM
Cleaning Internal Printer Print Head
Description
The print head should be cleaned when broken or light characters occur in a vertical
line on the page. To maintain a high quality print, clean the print head after 200 to
300 prints.
The print head is cleaned with a special cleaning paper which is supplied with the
instrument.
WA RN IN G
The paper tear-off edge is SHARP. This edge is exposed when the printer cover
is raised. Note the
1 Open the printer as for changing the paper. See "Changing Internal Printer Paper
HOW TO:
2 Feed the cleaning paper into the top entry of the print mechanism with the rough
3 When the automatic feed is complete and the paper stops moving use the
4 Remove the cleaning paper and replace the normal printer paper. See "Changing
NOT E
Retain the cleaning paper. It is designed to last for the life of the printer.
158
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
CAUTION SHARP EDGE label on the cover.
!
" page 155.
If printer paper is fitted, remove it from the printer.
black side, which contains the cleaning material, towards the rear of the printer.
instrument front panel key
PAPER FEED
the print mechanism.
Internal Printer Paper " page 155.
to move the cleaning paper through
Advertisement
Table of Contents
