Agilent Technologies PSA Series User And Programming Manual page 254

Instrument Functions: P - Z
System
Remote Command:
:CALibration:RF
:CALibration:RF?
Remote Command Notes: The query performs the alignment and returns a zero if the
alignment is successful.
Example:
CAL:RF?
4.9.4.4.2 Align IF
Initiates an alignment on the IF assembly.
Key Path:
System
Annunciation/
Annotation: Will display a series of pop-up message boxes indicating alignment
progress.
SCPI Status Bits/
OPC Dependencies: Status questionable calibration Bit 4 will be set if
Remote Command:
:CALibration:IF
:CALibration:IF?
Remote Command Notes: The query performs the alignment and returns a zero if the
alignment is successful.
Example:
CAL:IF?
4.9.4.4.3 Align ADC
Initiates an alignment on the ADC circuitry.
Key Path:
System
Annunciation/
Annotation: Message boxes indicating alignment of ADC progress.
SCPI Status Bits/
OPC Dependencies: Status questionable calibration Bit 6 will be set if
254
, ,
Alignments Align Subsys
, ,
Alignments Align Subsys
fails.
Align RF
fails.
Align ADC
Chapter 4