Agilent Technologies PSA Series User And Programming Manual page 255

Remote Command:
:CALibration:ADC
:CALibration:ADC?
Remote Command Notes: The query performs the alignment and returns a zero if the
alignment is successful.
Example:
CAL:ADC?
4.9.4.4.4 Align Current IF Flatness
Initiates an alignment of the current IF flatness, for the purpose of improving absolute
amplitude within FFT Sweeps and improving group delay in some digital demodulation
measurements.
Key Path:
System
Annunciation/
Annotation:
Will display a series of pop-up message boxes explaining what is being aligned (a
subset of the Align All Now message boxes).
Remote Command:
:CALibration:FLATness:IF
:CALibration:FLATness:IF?
Remote Command Notes: The query performs the alignment and returns a zero if the
alignment is successful.
Example:
CAL:FLAT:IF?
4.9.4.4.5 Align Current SysGain
Initiates a fine-tuning adjustment of the system gain, primarily to correct for small
amplitude variations that occur as resolution BW is switched.
Key Path:
System
Annunciation/
Annotation: Will display a series of pop-up message boxes explaining what is being
aligned (a subset of the Align All Now message boxes).
Chapter 4
, ,
Alignments Align Subsys
, ,
Alignments Align Subsys
Instrument Functions: P - Z
System
255