Instrument Functions: A - L
AMPLITUDE / Y Scale
Remote Command:
[:SENSe]:POWer[:RF]:PADJust <freq>
[:SENSe]:POWer[:RF]:PADJust?
[:SENSe]:POWer[:RF]:PADJust:PRESelector MWAVe|MMWave|EXTernal
[:SENSe]:POWer[:RF]:PADJust:PRESelector?
Example:.
POW:PADJ:PRES MMW
POW:PADJ 100 KHZ
2.1.7 3 - 26 GHz
Selects the preselector for the analyzers microwave frequency bands.
Key Path:
AMPLITUDE / Y Scale
Dependencies/
Couplings:
This function is not available (grayed out) if:
grayed out if microwave preselector is bypassed (see
•
Microwave Preselector
grayed out if in external mixing. Error 231 is sent.
•
grayed out if entirely in band 0. Error 208 is sent.
•
grayed out if entirely in bands 5-6. Error 208 is sent.
•
History:
Added in revision A.06.00.
Remote Command:
See
"Presel Adjust" on page
2.1.7.1 26 - 50 GHz
Selects the preselector for the analyzers millimeterwave frequency bands.
Key Path:
AMPLITUDE / Y Scale
Dependencies/
Couplings:
This function is not available (grayed out) if:
grayed out if no part of the span is in bands 5 or 6. Error 208 is sent.
•
grayed out if using external mixing. Error 231 is sent.
•
History:
Added in revision A.06.00.
40
,
Presel Adjust
.) Error 229 is sent.
38.
,
Presel Adjust
,
Input/Output
Chapter 2