Config I/O - Agilent Technologies PSA Series User And Programming Manual
Spectrum analyzers
Hide thumbs
Also See for PSA Series:
- Service manual (436 pages) ,
- Manual (382 pages) ,
- Getting started manual (82 pages)
Table of Contents
Advertisement
Remote Command:
:CALibration:TCORrections AUTO|ON|OFF
Example:
CAL:TCOR OFF
4.9.5 Config I/O
Displays the keys and menus that enable you to identify and change the current GPIB
address and LAN settings.
Key Path:
System
Remote Command:
There is no remote command for this key.
4.9.5.1 GPIB Address
Shows the current GPIB address and allows you to change this value using the numeric
keyboard. The new value is displayed in the active function area. The GPIB port is always
active. The knob and step keys are not active for this function.
Key Path:
System
Survives
State Saved:
SCPI Status Bits/
OPC Dependencies: None
Factory
Default:
18 (Reset by
Terminators:
Enter
Default Terminator: None
Resolution/Rounding/
Truncation:
Integer
Knob Increment: 1
Step Key
Increment:
1
Range:
0 to 30
Remote Command:
:SYSTem:COMMunicate:GPIB[:SELF]:ADDRess <integer>
:SYSTem:COMMunicate:GPIB[:SELF]:ADDRess?
Example:
SYST:COMM:GPIB:ADDR 20
Chapter 4
,
Config I/O
and power cycle, but not saved in Instrument State.
Preset
,
System
Restore Sys Defaults
Instrument Functions: P - Z
.)
System
257
Advertisement
Table of Contents
