Agilent Technologies PSA Series User And Programming Manual page 125

2.6.2.3.3
Bitmap
When the file type is
Screen
(GIF) file format for your saved data. For more information on file types, refer to
.
Types" on page 114
Key Path: ,
File Save
2.6.2.3.4
Reverse Bitmap
When the file type is
Screen
saved data. For more information on file types, refer to
Key Path: ,
File Save
2.6.2.4 Source
When the file type is set to
saves all traces in a single.TRC file.
All
When the file type is set to
menu keys, which allow you to select the type of correction to be saved.
When the file type is set to
and provide data sets to determine whether a trace has exceeded preset
Limit 2
specifications. Limit sets can hold up to 200 points and can only be saved individually.
For any other Save type,
Key Path: ,
File Save
State Saved:
Source
Factory Preset:
Source
2.6.2.4.1
Trace 1
Selects trace 1 to be saved.
Key Path:
,
File Save
Chapter 2
, this key selects the bitmap Graphics Interchange Format
,
Format
, this key selects the inverse bitmap file format (GIF) for your
,
Format
, this key allows you to save trace
Trace
,
Corrections Source
, accesses the
Limits Source
is disabled (grayed out).
Source
is not saved in Instrument State.
survives
Factory Preset
,
Source
"File Types" on page 114
,
1
accesses the ,
Antenna Cable
and
Limit 1 Limit 2
and *RST, but is set to
Instrument Functions: A - L
File
"File
.
, or . Saving trace
2 3 All
, and
Other User
menu keys.
Limit 1
at power up.
All Traces
125