Print; Exit - Agilent Technologies 86038B User Manual

Print

Exit

96
.csv ASCII text file of comma separated values. This type of files includes
measurement results and settings in a format that can be viewed
easily with a spreadsheet or analysis packages such as Excel or
MatLab.
.jpg Image file format that contains a screen capture of the ODA
application. The benefit of this format is that the file size is small,
however the image quality is reduced.
.bmp Image file format that contains a screen capture of the ODA
application. The benefit of this format is that the image quality is
high, however the file size is very large.
.tif Image file format that contains a screen capture of the ODA
application. The benefit of this format is that the file size is small and
the image quality is high. This format is not supported by some
applications.
.log ASCII text file used to save the PDLA Status Log. This can be helpful
to document any problems that occur and to facilitate service.
.pme ASCII text file of comma separated values. This exports Mueller
Matrix and PMD Vector data, if generation of this data was selected
in the Measurement Type Setup panel at the time of measurement.
The data consists of 9 columns with the form: wavelength (nm),
m11, m12, m13, m14, GDavg, PMD1, PMD2, PMD3, where m11-m14
is the top row of the Mueller Matrix at the given wavelength and
(PMD1, PMD2, PMD3) is the PMD vector.
Prints a copy of the graphical display and pertinent instrument
settings. Use the parallel port on the rear panel of the PNA to
connect to your printer.
Exits the PDLA application. This is usually only necessary for
performing administration of the computer. Since exiting the
program and restarting it results in restarting the 90 minute
warm-up cycle, it is usually preferable to minimize the
application.
Agilent 86038B Photonic Dispersion and Loss Analyzer, Second Edition