Agilent Technologies PSA Series User And Programming Manual page 115

• Limits - A file that contains a copy of the analyzer limit sets at the time the file is saved. Limits
provide data sets to determine whether a trace has exceeded preset specifications. Limit sets can
hold up to 200 points and can only be saved individually. Refer to the
description, page 125. When you load a
sets that were in the instrument at the time of the save.
When loading Limits files, be sure you have selected the appropriate X Axis
NOTE
Units: frequency or time (
time X-Axis Units, and you load frequency limits, all current limit line
data will be erased and the analyzer will switch to frequency units. The
reverse of the this situation also holds true.
Screen - A file that contains an exact representation of the analyzer display at the time
•
it was saved. You cannot extract data from
you can print them or include them in other documents;
display looked when the file was saved. They cannot be loaded into the analyzer. There
are four formats for screen files,
Bitmap: A file that contains an exact bit representation of the screen. Stored in
Graphics Interchange Format (GIF) format.
Reverse Bitmap: Same as
white and the yellow traces are turned to green to preserve printer black ink.
Corrections - A file that contains a copy of the analyzer correction tables at the time
•
the file is saved (CBL, ANT, OTH, AMP). Corrections provide a way to adjust the trace
display for preset gain factors (such as for cable loss). A correction set can hold up to 200
points. Pressing
Corrections
description, page 125. When you load a
of the corrections values that were in the instrument at the time of the save.
Measurement Results- A file that contains a copy of the analyzer measurement data
•
that was current at the time the file is saved. Measurement results files are saved in
.CSV format (for importing into spreadsheets). When you load a
into the analyzer, you restore all of the measurement data that was in the instrument
at the time of the save.
Chapter 2
file into the analyzer, you restore all of the limit
Limits
,
Display Limits
Screen
and
Bitmap Reverse Bitmap
, but the black display backgrounds are changed to
Bitmap
activates the key. Refer to the
Source
Corrections
Instrument Functions: A - L
, ,
File Save
, ,
Properties X Axis Units
files as you can with
Trace
files look exactly as the
Screen
.
,
File Save
file into the analyzer, you restore all
Measurement Results
File
key
Source
). If you are in
files, but
, key
Source
file
115