Agilent Technologies PSA Series User And Programming Manual page 260
Spectrum analyzers
Hide thumbs
Also See for PSA Series:
- Service manual (436 pages) ,
- Manual (382 pages) ,
- Getting started manual (82 pages)
Table of Contents
Advertisement
Instrument Functions: P - Z
System
Remote Command:
There is no remote command for this key.
4.9.5.7 SCPI LAN
Displays keys to enable SCPI functionality over LAN. There are a number of different
ways to send SCPI remote commands to the instrument over the LAN. It can be a problem
to have multiple users simultaneously accessing the instrument over the LAN. These keys
allow you to limit that somewhat by disabling the telnet socket and/or SICL capability.
Key Path:
System
Remote Command:
There is no remote command for this key.
4.9.5.7.1 SCPI Telnet
Turns on/off the SCPI LAN telnet capability allowing you to limit SCPI access over LAN
via telnet.
Key Path:
System
Survives
State Saved:
SCPI Status Bits/
OPC Dependencies: None
Factory
Default:
On (Reset by
Remote Command:
:SYSTem:COMMunicate:LAN:SCPI:TELNet:ENABle OFF|ON|0|1
:SYSTem:COMMunicate:LAN:SCPI:TELNet:ENABle?
Example:
SYST:COMM:LAN:SCPI:TELN:ENAB ON
260
,
Config I/O
,
SCPI Lan
and power cycle, but not saved in Instrument State.
Preset
,
System
Restore Sys Defaults
.)
Chapter 4
Advertisement
Table of Contents
