Agilent Technologies PSA Series User And Programming Manual page 322

Programming Fundamentals
Using the LAN to Control the Instrument
For faster troubleshooting, you may want to set the timeout to a
smaller number. If the host name you enter doesn't work, try using the
IP address of your instrument (example: 191.108.43.5). Using the IP
address rather than the hostname may also be faster. See
an example of an VEE screen.
Changing the host name in the instrument does not change your LAN
NOTE
system's representation of the host name. You must work through your
local system administrator to change the host name on your LAN
system.
Figure 5-2 Sample VEE Screen
322
Figure 5-2 for
Chapter 5