Agilent Technologies PSA Series User And Programming Manual page 123

MMEM:STOR:STAT 1,'C:\mystate.sta' saves the current instrument
Example:
state to the specified file name. The .sta extension is required.
*SAV saves the current instrument state to a file name REGxxx, where xxx
= the register number. The available register numbers are 0 to 127.
MMEM:STOR:SCR 'C:\myscreen.gif' The file must have a .gif file
extension. The specified file extension determines which file format the
instrument will use to save the image. Only
Bitmap
MMEM:STOR:TRAC TRACE3,'C:\mytrace.trc' Saves trace 3 to the trace +
state file C:\MYTRACE.TRC
MMEM:STOR:CORR ANT, 'A:TEST1.AMP' saves the current antenna
correction to the specified file name. The .amp extension is required.
MMEM:STOR:LIM LLINE2,'C:mylimit.lim' saves the current limit line
two data set to the specified file name. The .lim extension is required.
MMEM:STOR:RES 'A:ACP.CSV' saves the current ACP measurement
results to the specified file name. The .csv extension is required.
2.6.2.2 Type
Allows you to select the type of data you want to save. The file types available for saving
are described below. See
information.
Type Format
State
State
Trace + state
Trace
Comma separated trace values
Internal data format
Limit
Bitmap
Screen
Reverse bitmap
Internal data format
Corrections
Comma separated values
Measurement
Results
Chapter 2
).
"File Types" on page 114
is available (not
Bitmap
and
"Type" on page 117
Source
Trace 1, 2, 3, or all traces
Trace 1, 2, 3, or all traces
Instrument Functions: A - L
File
Reverse
for more
Extension
STA
TRC
CSV
LIM
GIF
GIF
ANT, CBL, OTH,
and AMP
CSV
123