YASKAWA iQpump Micro CIMR-PW Series User Manual page 411

Register No.
Option Card Fault Contents
bit 0
bit 1
00D8H
bit 3
bit 4
bit 5 to F
00FBH
Output Current
<1> Units are determined by parameter o1-03.
<2> Display is in the following units: BA0001 to BA0018, 2A0001 to 2A0040, and 4A0001 to 4A0023: 0.01 A units.
2A0056 to 2A0069, 4A0031 to 4A0038: 0.1 A units.
<3> The communication error log is stored until the fault is reset.
<4> Depending on the motor used the correct motor pole number must be set to parameter E2-04.
YASKAWA TOEP YAIQPM 03B YASKAWA AC Drive - iQpump Micro User Manual
Option Compatibility Error (oFA00)
Option not properly connected (oFA01)
Option Self-diagnostics Error (oFA03)
Option Flash Write Mode Error (oFA04)
Reserved
<2>
C.10 MEMOBUS/Modbus Data Table
Contents
C
411