YASKAWA iQpump Micro CIMR-PW Series User Manual page 216

5.10 o: Operator Related Settings
U1-01: Frequency Reference
U1-02: Output Frequency
U1-05: Motor Speed
U1-16: Output Frequency after Soft-Starter (Accel/Decel Ramp Generator)
d1-01 to d1-17: Frequency References
o1-05: LCD Contrast Control
n
Sets the brightness of the optional LCD operator. The lower the setting, the brighter the LCD contrast. The higher the setting,
the darker the LCD contrast.
No.
o1-05
o1-06: User Monitor Selection Mode
n
Select between standard sequential monitors or selectable monitors to be displayed on the 2nd and 3rd lines of the digital
operator display.
Use parameters o1-07 and o1-08 to select and fix the second and third monitors shown in the Home (Frequency Reference)
and Monitor screen to ensure that those monitors are always visible when scrolling through the monitor list.
No.
o1-06
Setting 0: 3 Mon Sequential (displays the next 2 sequential monitors)
Setting 1: 3 Mon Selectable (set by o1-07 and o1-08)
o1-07: Second Line User Monitor Selection
n
Selects the monitor that is shown in the second line. Effective only when o1-06 is set to 1.
Enter the last three digits of the monitor parameter number to be displayed: Uo-oo. For example, set "403" to display
monitor parameter U4-03.
No.
o1-07
o1-08: Third Line User Monitor Selection
n
Selects the monitor that is shown in the third line. Effective only when o1-06 is set to 1.
Enter the last three digits of the monitor parameter number to be displayed: Uo-oo. For example, set "403" to display
monitor parameter U4-03.
No.
o1-08
216
Name
LCD Contrast Control
Name
User Monitor Selection Mode
Name
Second Line User Monitor Selection
Name
Second Line User Monitor Selection
Setting Range
Setting Range
Setting Range
101 to 799
Setting Range
101 to 904
YASKAWA TOEP YAIQPM 03B YASKAWA AC Drive - iQpump Micro User Manual
Default
0 to 5
Default
0, 1
Default
102
Default
191
3
0