YASKAWA iQpump Micro CIMR-PW Series User Manual page 302

7.5 Drive Replacement
2.
Pull the pin on the ground terminal out of the removable terminal block.
3.
Push down the installation pin on the terminal board with a screwdriver
4.
While holding down the locking pin from step 3, slide the removable terminal block in the direction of the arrows in
Figure 7.17.
302
Figure 7.14 Remove the Front Cover
Pull out the
ground terminal
pin in the direction
indicated by
the arrow.
Cable
Terminal
Figure 7.15 Pull Out the Ground Terminal
Figure 7.16 Depress the Plastic Tab
YASKAWA TOEP YAIQPM 03B YASKAWA AC Drive - iQpump Micro User Manual
Push down
the terminal
board locking
pin with a
screwdriver.