YASKAWA iQpump Micro CIMR-PW Series User Manual page 351

No.
(Addr. Name
Hex)
L8-35 Installation Method
(04EC) Selection
L8-38 Carrier Frequency
(04EF) Reduction
Carrier Frequency
L8-40
Reduction Off Delay
(04F1)
Time
L8-41 High Current Alarm
(04F2) Selection
<1> Default setting is dependent on parameter o2-04, Drive Model Selection.
<2> Parameter setting value is not reset to the default value when the drive is initialized.
YASKAWA TOEP YAIQPM 03B YASKAWA AC Drive - iQpump Micro User Manual
LCD Display
Installation Sel 0: IP00/Open-Chassis enclosure
0: IP00/OpenChassis 1: Side-by-Side mounting
1: Side-by-Side 2: IP20/NEMA 1, UL Type 1 enclosure
2: IP20/Nema 1, UL 3: Finless model drive or external heatsink installation
Type 1
3: ExternalHeatsink
Fc Reduct dur OL 0: Disabled
0: Disabled 1: Enabled below 6 Hz
1: Active below 6Hz 2: Enabled for the entire speed range
2: Active @ any Spd
Sets the time that the drive continues running with reduced
Fc Reduct Time carrier frequency after the carrier reduction condition is gone.
Setting 0.00 s disables the carrier frequency reduction time.
High Cur Alm Sel 0: Disabled
0: Disabled 1: Enabled. An alarm is triggered at output currents above 150%
1: Enabled of drive rated current.
B.9 L: Protection Function
Description Values Page
<1> <2>
Default:
211
Range: 0 to 3
Default: 1
211
Range: 0 to 2
Default: 0.50 s
212
Min.: 0.00
Max.: 2.00
Default: 0
212
Range: 0, 1
B
351