YASKAWA iQpump Micro CIMR-PW Series User Manual page 162

5.6 F: Option Settings
F6-07: NetRef/ComRef Function Selection
n
Selects how multi-step speed inputs are treated when the NetRef command is set.
No.
F6-07
Setting 0: Multi-Step Speed Operation Disabled
If the NetRef command is selected, multi-step speed input frequency references are disabled. This is the same as Yaskawa F7
drives.
Setting 1: Multi-Step Speed Operation Enabled
Multi-step speed inputs are active and can override the frequency reference from the communications option even when the
NetRef command is selected. This is the same as Yaskawa F7 drives.
F6-08: Reset Communication Parameters
n
Determines whether communication-related parameters (F6-oo and F7-oo) are reset when the drive is initialized using
A1-03.
No.
F6-08
Setting 0: Do Not Reset Parameters F6-oo and F7-oo when the Drive Is Initialized with A1-03
Setting 1: Reset F6-oo and F7-oo when the Drive Is Initialized with A1-03
Note: F6-08 is not reset when the drive is initialized, but does determine whether initializing the drive with A1-03 resets communication parameters
F6-oo and F7-oo.
u MECHATROLINK-II Parameters
Parameters F6-20 through F6-26 set up the drive to operate on a MECHATROLINK-II network. Refer to the option manual
for details on parameter settings.
MECHATROLINK-III Parameters
u
Parameters F6-20, F6-21, and F6-23 through F6-26 set up the drive to operate on a MECHATROLINK-III network. Refer to
the option manual for details on parameter settings.
PROFIBUS-DP Parameters
u
Parameters F6-30 through F6-32 set up the drive to operate on a PROFIBUS-DP network. Refer to the option manual for
details on parameter settings.
DeviceNet Parameters
u
Parameters F6-50 through F6-63 set up the drive to operate on a DeviceNet network. Refer to the option manual for details
on parameter settings.
F7-01 to F7-42: EtherNet/IP and Modbus TCP/IP Option Parameters
u
F7-oo parameters are reserved for use with SI-EN3/V and SI-EM3/V options. Refer to the Option Installation Manuals for
details.
162
Parameter Name
NetRef/ComRef Function Selection
Parameter Name
Reset Communication Parameters
Setting Range
Setting Range
YASKAWA TOEP YAIQPM 03B YASKAWA AC Drive - iQpump Micro User Manual
Default
0 or 1
Default
0 or 1
0
0