YASKAWA iQpump Micro CIMR-PW Series User Manual page 282

6.5 Operator Programming Errors
LED Display LCD Display
The following simultaneous contradictory
settings:
• H3-02 or H3-06 = B (PID Feedback) while
H6-01
(Pulse Train Input) = 1 (PID Feedback)
• H3-02 or H3-06 = C (PID Target Value)
while H6-01 = 2
(pulse train input sets the PID target value)
LED Display LCD Display
ope09
Cause
b5-01 is set to 1 or 2, enabling PID control,
but the lower limit for the frequency
reference (d2-02) is not set to 0 while reverse
output is enabled
(b5-11 = 1).
LED Display LCD Display
ope10
Cause
V/f pattern setting error.
LED Display LCD Display
ope11
Cause
The following simultaneous contradictory
settings have occurred: C6-05 > 6 and C6-04
> C6-03 (carrier frequency lower limit is
greater than the upper limit).
If C6-05 ≤ 6, the drive operates at C6-03.
The upper and lower limits between C6-02
and C6-05 are contradictory.
LED Display LCD Display
ope33
Incompatible
Cause
When P1-01 = 3 (MEMOBUS Networking)
and P9-99 = 0 (A-Version 30034), one of the
following parameters has been set:
• P9-01 = 2 (Stop History)
• P9-05 = 3 (Follow Lead Speed)
282
Disable one of the PID selections.
PID Control Selection Fault
oPE09
PID control function selection is incorrect. Requires that PID control is enabled (b5-01 = 1).
Correct the parameter settings.
V/f Data Setting Error
One of the following setting errors has occurred:
oPE10
E1-09 ≤ E1-07 < E1-06 ≤ E1-11 ≤ E1-04
Correct the settings for E1-04, E1-06, E1-07, E1-09, and E1-11.
Carrier Frequency Setting Error
oPE11
Correct the setting for the carrier frequency.
Correct the parameter settings.
oPE33
Parameter selection is incompatible with the selected network P9-99
Net
Confirm parameter settings for P1-01, P9-01, P9-99, and P9-05.
Error Name
Error Name
Possible Solutions
Error Name
Possible Solutions
Error Name
Possible Solutions
Error Name
Possible Solutions
YASKAWA TOEP YAIQPM 03B YASKAWA AC Drive - iQpump Micro User Manual