4.6 Using the Optional HOA Keypad
After entering the correct time, press the ENTER key to save the changes.
8
The display will return to the display shown in step 5 and the alarm LED will be OFF.
o4-17: Real-Time Clock Setting (Resetting RTC to Factory Default)
n
No.
(Addr.
Name
Hex)
o4-17
Set/Reset Real-time Clock
(3100)
Setting 0: — —
No Setting (Default)
Setting 1: Set
The digital operator will show the Clock Adjustment display. In Clock Adjustment Mode the user can adjust the Real-Time
Clock.
Setting 2: Reset
The Real-Time Clock data is cleared. A Clock Not Set alarm will occur until o4-17 is set to 1 and the Real-Time Clock is set.
80
Procedure
Sets the current date and time for the Real-Time Clock.
0: — — No Setting
1: Real-Time Clock Set
2: Real-Time Clock Reset
YASKAWA TOEP YAIQPM 03B YASKAWA AC Drive - iQpump Micro User Manual
Description
Display
ALM
Entry accepted
Values
Default: 0
Range: 0 to 2