YASKAWA iQpump Micro CIMR-PW Series User Manual page 75

LCD Display
u
No. Name
1 Operation Mode Menus
2 Mode Display Area
3 Ready
4 Data Display
Frequency
Reference
5
<1>
Assignment
LOCAL/REMOTE
6
<2>
Display
Function Key 2
7
(F2)
8 FWD/REV
YASKAWA TOEP YAIQPM 03B YASKAWA AC Drive - iQpump Micro User Manual
Figure 4.5 LCD Display
Table 4.3 Display and Contents
Display
MODE Displayed when in Mode Selection.
QMONI: Use F1/F2 Instructions to access the Quick Monitors.
MENU: Use UP/
Instructions to access the next menu item.
DWN
MONITR Displayed when in Monitor Mode.
VERIFY Indicates the Verify Menu.
PRMSET Displayed when in Parameter Setting Mode.
A.TUNE Displayed during Auto-Tuning.
SETUP Displayed when in Setup Mode.
DRV Displayed when in Drive Mode.
PRG Displayed when in Programming Mode.
Rdy Indicates the drive is ready to run.
— Displays specific data and operation data.
OPR Displayed when the frequency reference is assigned to the HOA keypad.
Displayed when the frequency reference is assigned to the MEMOBUS/Modbus
COM
Communication Inputs of the drive.
OP Displayed when the frequency reference is assigned to option card connected to the drive.
AI Displayed when the function reference is assigned to an analog input.
OFF Displayed when HAND mode is OFF.
RSEQ Blinks when the Run command is supplied from a remote source.
LSEQ Displayed when the Run command is supplied from the HOA keypad.
RREF Blinks when the Run command is supplied from a remote source.
LREF Displayed when the Run command is supplied from the HOA keypad.
<-MONITOR->
Pressing
DATA
Pressing
→
Pressing
RESET
Pressing
Monitor
Pressing
FWD Indicates forward motor operation.
REV Indicates reverse motor operation.
4.6 Using the Optional HOA Keypad
Content
F2
displays the next Quick Monitor.
F2
scrolls to the next display.
F2
scrolls the cursor to the right.
F2
resets the existing drive fault error.
F2
switches Monitor mode.
4
75