YASKAWA iQpump Micro CIMR-PW Series User Manual page 246

5.12 Q: PID Controller
Setting 0: Disabled
Setting 1: Enabled
Q3-11: Ripple Regulator Setpoint
n
Set as a percentage of the maximum amount of ripple allowed before an input phase loss fault is detected.
No.
Q3-11
S6: Drive Protection
u
S6-01: Emergency Override Speed
n
Sets the sped command used in emergency override mode when S6-02 = 0.
No.
S6-01
S6-02: Emergency Override Reference Selection
n
Selects the emergency override speed source.
No.
S6-02
Setting 0: Use S6-01 Reference
Setting 1: Use Frequency Reference
T: Motor Tuning
u
Auto-Tuning automatically sets and tunes parameters required for optimal motor performance.
Refer to T: Motor Tuning on page 368
246
Name
Ripple Regulator Setpoint
Name
Emergency Override Speed
Name
Emergency Override Reference Selection
for details on Auto-Tuning parameters.
Setting Range
0.0 to 200.0%
Setting Range
0.00 to 240.00 Hz
Setting Range
YASKAWA TOEP YAIQPM 03B YASKAWA AC Drive - iQpump Micro User Manual
Default
95.0%
Default
0.00 Hz
Default
0, 1 0