YASKAWA iQpump Micro CIMR-PW Series User Manual page 76

4.6 Using the Optional HOA Keypad
No. Name
Function Key 1
9
(F1)
<1> Displayed when in Frequency Reference Mode.
<2> Displayed when in Frequency Reference Mode and Monitor Mode.
u ALARM (ALM) LED Displays
State
Illuminated When the drive detects an alarm or error.
• When an alarm occurs.
Flashing • When an oPE is detected.
• When a fault or error occurs during Auto-Tuning.
Off Normal operation (no fault or alarm).
AUTO LED and HAND LED Indications
u
AUTO LED
AUTO
Off
AUTO
Off
AUTO
Off
AUTO
On solid
AUTO
Off
AUTO
Off
AUTO
Long blink (50% duty)
AUTO
Short blink (15% duty)
AUTO
Double blink
76
Display
<-MONITOR->
Pressing
←
Pressing
Home
Pressing
ESC
Pressing
Monitor
Pressing
Table 4.4 ALARM (ALM) LED Status and Contents
Content
Table 4.5 AUTO LED and HAND LED Indications
HAND LED
OFF mode
HAND
Off
HAND mode (Also during DC injection braking)
HAND
On solid
HAND mode when the Frequency Reference is 0 and/or decelerating in HAND mode, or
HAND
during PI Sleep or Snooze.
Long blink (50% duty)
Running in AUTO mode (Also during DC injection braking)
HAND
Off
HAND mode, Ready, No Run command input.
HAND
Short blink (15% duty)
HAND mode, cycle the Run command.
HAND
Double blink
Running in AUTO mode when the Frequency Reference is 0 and/or decelerating in AUTO
HAND
mode, or during PI Sleep or Snooze.
Off
AUTO mode, Ready, No run command input.
HAND
Off
AUTO mode, stopped by a Fast- Stop from a Multi-Function Digital Input.
HAND
Off
F1
displays the previous Quick Monitor.
F1
scrolls the cursor to the left.
F1
returns to the top menu (Frequency Reference).
F1
returns to the previous display.
F1
switches Monitor mode.
Note: Short Blink for Legacy Operation Mode (S5-04 = 0).
YASKAWA TOEP YAIQPM 03B YASKAWA AC Drive - iQpump Micro User Manual
Content
Display
State