YASKAWA iQpump Micro CIMR-PW Series User Manual page 82

4.6 Using the Optional HOA Keypad
Home Quick Monitor Display (Optional HOA Keypad)
n
The Home Quick Monitor provides an easily accessible preset group of monitors that are frequently used during operation.
The following monitors are available via the Quick Monitor:
Monitor
U1-01
U5-99
U1-02
U1-03
U1-06
U1-07
U1-08
U1-10
u Changing Parameter Settings or Values
This example explains changing C1-02 (Deceleration Time 1) from 10.0 seconds (default) to 20.0 seconds.
Note:
During serial communication writing, if a parameter change is also attempted via the HOA keypad, a "BUSY - WRITE PROTECTED"
message will display. Parameter change will not be possible from the HOA keypad until an Enter command is received via the serial
communication to finish the serial writing process.
1. Turn on the power to the drive. The initial display appears.
2. Press
or until the Parameter Setting Mode screen appears.
3. Press
to enter the parameter menu tree.
4. Press
or to select the C parameter group.
82
Figure 4.10 Home Quick Monitor Screen
Name
Frequency Reference
Auto Setpoint
Output Frequency
Output Current
Output Voltage
DC Bus Voltage
Output Power
Input Terminal Status
Step
Monitor
U1-11
U1-13
U1-14
U1-25
U4-01
U9-02
U1-99
YASKAWA TOEP YAIQPM 03B YASKAWA AC Drive - iQpump Micro User Manual
Name
Output Terminal Status
Terminal A1 Level
Terminal A2 Level
CPU 1 SW Number
Drive Elapsed Time
iQ Network Activity
Anti-No-Flow Timer
Display/Result
- MODE - DRV Rdy
Auto Setpoint
U5-99= 0.0PSI
U1-02= 0.00Hz
LSEQ
U1-91= 0.0PSI LREF
<-MONITOR->
- MODE - PRG
Programming
Home FWD
-PRMSET- PRG
Initialization
A1-00= 0
Select Language
Home FWD DATA
-PRMSET- PRG
Basic Setup
C1-01= 20.0 sec
Accel Time 1
Home
FWD FWD DATA