Table of Contents
Advertisement
Installing the Internal Fan
n
1.
Fasten the replacement internal fan into place.
Note:
Pay special attention to the fan label direction, fan lead wire routing, and fan support bracket direction when connecting the
fan and the fan support in the drive.
A – Label
B – Cooling fan
2.
Install the fan unit back into the drive enclosure in its original position.
3.
Plug the fan connector (CN7) back in.
Removing the External Fan
n
1.
Remove the front cover.
on page 48
for details.
2.
Unplug the fan connector (CN7).
A – Fan
B – Fan relay cable
Note:
The external fan is installed outside of the waterproof/dust-proof enclosure.
3.
Remove the screws to take the fan guard out of the drive. Push the rubber bushing out of conduit hole and take the
internal fan out of the drive.
YASKAWA TOEP YAIQPM 03B YASKAWA AC Drive - iQpump Micro User Manual
BV0012G
2V0020G
4V0007G to 4V0011G
Figure 7.7 Removing the Internal Fan
BV0012G
2V0020G
4V0007G to 4V0011G
C
B
A
Figure 7.8 Internal Fan Replacement
Refer to IP66/NEMA 4X, UL Type 4X Enclosure Front Cover Removal and Installation
A
D
Figure 7.9 External Fan Components
2V0030G to 2V0069G
4V0018G to 4V0038G
2V0030G to 2V0069G
4V0018G to 4V0038G
B
A
C – Fan support
C
B
C – Fan connector (CN7)
D – Rubber bushing
7.4 Drive Cooling Fans
C
7
299
Hide quick links:
Advertisement
Chapters
Table of Contents
