YASKAWA iQpump Micro CIMR-PW Series User Manual page 54

3.6 Main Circuit Wiring
Wiring the Main Circuit Terminal
n
WARNING! Electrical Shock Hazard. Shut off the power supply to the drive before wiring the main circuit terminals. Failure to comply may
result in death or serious injury.
Note: A cover placed over the DC Bus and braking circuit terminals prior to shipment helps prevent miswiring. Cut away covers as needed for
terminals with a needle-nose pliers.
A –Protective Cover to Prevent Miswiring
Note:
The ground terminal screw on IP20/NEMA 1, UL Type 1 holds the protective cover in place on model 2V0006.
54
Figure 3.17 Multiple Drive Wiring
A
YASKAWA TOEP YAIQPM 03B YASKAWA AC Drive - iQpump Micro User Manual