Optional) Configuring The Next Hop Of A Route As The Local Address - Huawei S6700 Series Configuration Manual

S6700 Series Ethernet Switches
Configuration Guide - IP Routing
l
l
l
l
Pre-configuration Tasks
Before configuring the policy for advertising MBGP routes, complete the task of
Basic MBGP
Data Preparation
To configure the policy for advertising MBGP routes, you need the following data.
No.
1
2
3
4
9.4.2 (Optional) Configuring the Next Hop of a Route as the Local
Address
Configuring the next-hop of a route as the local address is applicable to IBGP peers.
Context
Do as follows on the switch configured with an MBGP peer.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
bgp as-number
The BGP view is displayed.
Step 3 Run:
ipv4-family multicast
The BGP-IPv4 multicast address family view is displayed.
Issue 01 (2012-03-15)
Whether MBGP advertises all local routes or only the locally aggregated routes
Whether MBGP advertises default routes
Whether MBGP advertises community attributes or extended community attributes
Whether a BGP Update message sent by an MBGP peer carries the private AS number
Functions.
Data
AS number
Address of a remote peer or the name of a peer group
Name of the routing policy
Addresses and masks of the local routes that need to be aggregated
NOTE
The configuration is optional, and is valid only for IBGP peer or peer group.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 MBGP Configuration
Configuring
561