Setting The Source Ipv6 Address Of Mld Query Messages; Checking The Configuration - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Multicast
The interval for sending the MLD Snooping General Query messages is set.
Step 4 Run:
mld-snooping max-response-time max-response-time
The maximum response time of the MLD Snooping General Query messages is set.
Step 5 Run:
mld-snooping last-listener-query-interval time-value
The interval for sending the MLD Snooping Specific-Group Query messages is set.
----End

4.6.4 Setting the Source IPv6 Address of MLD Query Messages

Context
Do as follows on the S2700.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
mld-snooping send-query source-address ipv6-address
The source IPv6 address of the MLD Query messages is set.
----End

4.6.5 Checking the Configuration

Procedure
Step 1 Run the display mld-snooping [ vlan vlan-id ] [ configuration ] command to check the
configuration of MLD snooping in a VLAN.
[Quidway]display mld-snooping vlan 95 configuration
MLD Snooping Configuration for VLAN 95
Step 2 Run the display mld-snooping configuration command to view the global configuration of
MLD snooping.
[Quidway] display mld-snooping configuration
MLD Snooping Configuration for VLAN 11
MLD Snooping Configuration for VLAN 12
----End
Issue 01 (2011-07-15)
mld-snooping enable
mld-snooping version 2
mld-snooping enable
mld-snooping group-policy 2000 2
mld-snooping enable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 MLD Snooping Configuration
61