Analog Devices Blackfin ADSP-BF537 Hardware Reference Manual page 1003

Hide thumbs Also See for Blackfin ADSP-BF537:

Table of Contents

Indicates boot process is complete after this block. After processing

address stored in the

start of L1 instruction memory upon a hardware reset. The proces-

sor is still in supervisor mode and in the lowest priority interrupt

) when it jumps to L1 memory for code execution.

For every boot block, the individual flags are processed by the algorithm

slave versus master boot modes. Where master modes can simply incre-

ment their source address pointer, slave modes actively consume and

"trash" the payload data.

the header of the first boot block. If the setting changes for later blocks,

that change is ignored.

ADSP-BF537 Blackfin Processor Hardware Reference

block, the on-chip boot ROM jumps to the reset vector

bit fields are processed only once while processing

System Reset and Booting

flag requires different processing for