Operating Features, Controls, Indicators
IUI Connector, Left
(not visible)
p
Display
%S
O
2
Pulse Rate Display
Channel (module)
Message Display
Module Release Latch:
When pressed, allows module
to be removed.
®
Alaris
System (with v9 Model 8000) DFU
SpO
Modules Section
2
Features and Displays (Continued)
Status Indicators
Alarm
(red)
Patient Cable Connector
Infusing
Standby
(green)
(yellow)
IUI Connector, Right
Pulse Bar Display
Channel (module) Identification
Channel (module) Select
Key:
When pressed, selects
corresponding module for patient
monitoring and setup.
Monitor Key:
When pressed,
begins patient monitoring.
Channel (module) Off Key:
When pressed and held until a
beep is heard, stops operation of
that module, deselects that module,
and if only that module had been
operating, system powers down.
Repeat for other operating modules
to power off each module.
General Information
4-21