Instruments are tested and calibrated before they are
packaged for shipment. To ensure proper operation after
shipment, it is recommended that an incoming inspection be
performed before placing the instrument in use.
Prior to placing the Alaris
1.
Perform check-in procedure using System Maintenance
software.
2.
Verify whether or not Profiles feature has been enabled
(see PC Unit Section, "System Options", "System
Configurations").
NOTE:
To enable the Profiles feature, a hospital-defined best-practice
Data Set must be uploaded to the PC Unit.
iv
Installation
®
System in use:
®
Alaris
System (with v9 Model 8000) DFU