Introduction And Setup; Infusion - Cardinal Health Alaris Directions For Use Manual

Infusion - NO
Bolus Dose (Continued)
7. Syringe Module: If bolus dose was programmed at
beginning of infusion, attach administration set to
patient.
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
Stopping and Restoring Bolus Dose
See "Primary Infusion - With Guardrails
"Bolus Dose" procedure.
NOTES:
If mcg or mg is selected as the dosing unit, a
entry cannot be made. If mcg/kg or mg/kg is
WEIGHT
selected as the dosing unit, a
required.
To see details during the bolus infusion, press the
SELECT
key.
Syringe Module: Starting the infusion before attaching the
administration set to the patient minimizes any potential bolus
that can be released from pressure built up in the set due to
normal syringe loading and priming.
Secondary Infusion - NO

Introduction and Setup

See "Secondary Infusion - With Guardrails
Protection".
The following procedure should be used only when:
• drug to be infused is not listed in Drug Library,
• primary infusion is running, and
• a check valve administration set is being used.
®
Alaris System (with v9 Model 8000) DFU
Pump and Syringe Modules Section
Guardrails Suite MX Protection (Continued)
®
® Suite MX Protection",
PATIENT
PATIENT WEIGHT
Guardrails
(
Pump Module
®
Suite MX

Infusion

entry is
CHANNEL
Suite MX Protection
®
)
FU
FU
RATE (mL/h)
RATE (mL/h)
CHANNEL
SELECT
CHANNEL
SELECT
PAUSE
PAUSE
CHANNEL
OFF
CHANNEL
OFF
RESTART
RESTART
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
2-55
Programming