Delay Options can be enabled at the time the Alaris
is configured for use. If Delay Options is enabled, a primary
infusion can be programmed to be delayed for a specified
period of time and a callback can be scheduled, as described
in the following procedures.
Since by definition, an infusion with Delay Options infuses
for a programmed period of time, it is assumed that another
infusing IV line keeps the vein open until the delayed infusion
begins. When a delay is programmed, the infusion stops when
complete and no
KVO
The delay period for an infusion can be programmed as a
specific number of minutes or a time of day, as described in the
following procedures. An infusion delay can be programmed
prior to or after an infusion is initiated.
Specifying by Minutes
The Delay for option is used to program an infusion delay for a
minimum of
minute and up to
1
DELAY OPTIONS
1.
Press
-- Continued on Next Page --
®
Alaris
System (with v9 Model 8000) DFU
Pump and Syringe Modules Section
Delay Options
is delivered.
Delaying Infusion
minutes.
120
soft key.
®
System
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
FU
FU
RATE (mL/h)
RATE (mL/h)
CHANNEL
SELECT
CHANNEL
SELECT
PAUSE
PAUSE
CHANNEL
OFF
CHANNEL
OFF
RESTART
RESTART
A
Infusion Setup
40
RATE
mL/h
250
VTBI
mL
>Press START
DELAY
SECOND-
START
OPTIONS
ARY
Programming
2-63