Preparing and Loading Syringe and Administration Set
For instructions on how to go from checking in a PCA Module
to preparing it for an infusion setup, see "General Setup and
Operation".
Preparing Syringe and Administration Set
1.
Prepare syringe (see "General Information", "Compatible
Syringes") in accordance with manufacturer's directions
for use.
2.
Prepare administration set (reference Set Compatibility
Card, provided separately) in accordance with
manufacturer's directions for use.
3.
Attach upper fitting of administration set to syringe tip.
®
Alaris
System (with v9 Model 8000) DFU
PCA Module Section
WARNING
Use only standard or pre-filled,
single-use, disposable syringes
(with luer-lock connectors) and
nondedicated administration sets
with integrated anti-siphon valves,
designed for use on syringe-type
pumps. The use of any other
PCA
syringe or administration set
may cause improper instrument
operation, resulting in inaccurate
fluid delivery, pressure sensing,
or other potential hazards. For
a list of compatible syringes, see
"General Information", "Compatible
Syringes". For a list of compatible
administration sets, reference the
Set Compatibility Card (provided
separately).
Getting Started
3-3