Cardinal Health Alaris Directions For Use Manual page 107

Primary Infusion
IV Fluid Infusion (Continued)
Volume/Duration Infusion (Continued)
3. To enter volume duration, press
use numeric data entry keys.
• Rate is automatically calculated.
4. Verify correct infusion parameter entry and press
soft key.
• If programmed IV Fluid is outside Soft Limit for that
care area, an audio alert sounds and a visual prompt
appears before programming can continue. If Yes soft
key is pressed, programming continues; if No soft key
is pressed, infusion needs to be reprogrammed.
•
If programmed IV Fluid is outside Hard Limit for that
care area, an audio alert sounds and a visual prompt
appears before programming can continue. Infusion
needs to be reprogrammed.
If a Soft Limit is overridden, G icon displays. When G
•
soft key is pressed, all applicable out-of-range limits
are listed.
5. Syringe Module: Attach administration set to patient.
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
NOTES:
Syringe Module: When
option is not available.
The infusion may be paused by pressing the
See "Pausing, Changing, Restarting Infusion", "Pausing and
Restarting Infusion" procedure.
-- Continued on Next Page --
Syringe Module: Starting the infusion before attaching the
administration set to the patient minimizes any potential bolus
that can be released from pressure built up in the set due to
normal syringe loading and priming.
-- Continued on Next Page --
®
Alaris System (with v9 Model 8000) DFU
Pump and Syringe Modules Section
- With Guardrails Suite MX Protection (Continued)
®
DURATION
is disabled, the
ALL MODE
PAUSE
soft key and
START
VTBI ALL
soft key.
FU
FU
RATE (mL/h)
RATE (mL/h)
CHANNEL
SELECT
CHANNEL
SELECT
PAUSE
PAUSE
CHANNEL
OFF
CHANNEL
OFF
RESTART
RESTART
Guardrails Fluid Setup
A
TPN
PRIMARY INFUSION
41.7
mL/h
RATE =
1000
VTBI
mL
24 00
h min
DURATION
>Enter Duration
RATE
START
PAUSE
VOLUME
Programming
2-43