Operating Features, Controls, Indicators - Cardinal Health Alaris Directions For Use Manual

Supports guardrails suite mx with guardrails point-of-care software and v9 operating system software. with pc unit, model 8000.
Table of Contents

Advertisement

Operating Features, Controls, Indicators

IUI Connector, Left
Module Release Latch:
When pressed, allows
module to be removed.
Alaris
®
System (with v9 Model 8000) DFU
Pump and Syringe Modules Section
Features and Displays (Continued)
Status Indicators
Alarm
Infusing
(red)
(green)
RATE (mL/h)
Standby
(yellow)
FU
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
Door Handle
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
IUI Connector, Right
Rate Display
Channel (module) Message Display
Channel (module) Identification
Channel (module) Select Key:
pressed, selects corresponding module
for infusion parameter entry and infusion
setup.
Pause Key:
When pressed during an
infusion, temporarily stops infusion on that
module. After approximately 2 minutes, a
visual and audio prompt begins.
Channel (module) Off Key:
pressed and held until a beep is heard,
stops infusion on that module, deselects
that module, and if only that module had
been operating, system powers down.
Repeat for other operating modules to
power off each module.
Restart Key:
When pressed, resumes
operation of a previously paused or
alarmed infusion on that module.
General Information
When
When
2-93

Advertisement

Table of Contents
loading

Table of Contents