Cardinal Health Alaris Directions For Use Manual page 154

Features and Definitions (Continued)
Pump Module (Continued)
Occlusion Pressure
Secondary Infusions
Syringe Module
All Mode
Auto Pressure
Auto Pressure Limit Adjustment
2-90
General Information
Features and Displays (Continued)
A complete range of downstream occlusion detection options is
provided.
• Pump mode: Downstream occlusion alarm threshold is
mmHg at flow rates of
525
occlusion pressure is rate-dependent, to ensure rapid response to
occlusions.
• Selectable pressure mode: Downstream occlusion alarm
threshold can be adjusted in
maximum occlusion pressure of
• Auto-Restart: (See "Auto-Restart" definition.)
In addition, Alaris
Dual rate sequential piggyback (secondary) infusions may be
infused, with limits, at delivery rates and volumes independent
of primary infusion parameters. Automatic changeover occurs to
primary infusion parameters when secondary infusion is complete if a
Pump Module/Gemini Infusion System check valve administration set
is used.
When
contents of syringe is delivered.
When enabled and a pressure sensing disc is in use, Auto
Pressure option is displayed in Pressure Limit screen. Auto
Pressure automatically sets alarm limit for a shorter time to alarm,
as follows:
• If current pressure is
to current pressure, to create a new alarm limit.
• If current pressure is greater than
to current pressure, to create a new alarm limit.
When a bolus is delivered, pressure alarm limits are temporarily
raised to maximum limit.
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
®
System provides fluid-side occlusion detection.
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
ALL
is selected as volume to be infused (
100
mL/h or greater. For rates
30
mmHg increments, up to
25
mmHg.
525
mmHg or less, system adds
mmHg, system adds
100
Alaris ® System (with v9 Model 8000) DFU
Pump and Syringe Modules Section
mL/h,
<30
), entire
VTBI
mmHg
30
30%