Messages - Cardinal Health Alaris Directions For Use Manual

Pump and Syringe Modules
Message
Anesthesia Mode
Bolus Dose Complete
Delay Complete
Infusion Complete
Infusion Complete - KVO
Panel Locked
Panel Unlocked
Pause
Start time for next dose has
passed.
2-122
Troubleshooting and Maintenance
Alarms, Errors, Messages (Continued)

Messages

Anesthesia Mode discontinued
when disconnected from
Module running in continuous
infusion mode if programmed.
Delay time completed.
Current infusion completed.
Programmed volume-to-be-infused
delivered; module running at
rate.
Tamper Resist feature is active and
a key was pressed.
Tamper Resist feature deactivated.
Pause control pressed; infusion
stopped.
Start of next dose passed.
FU
FU
RATE (mL/h)
RATE (mL/h)
CHANNEL
SELECT
CHANNEL
SELECT
PAUSE
PAUSE
CHANNEL
OFF
CHANNEL
OFF
RESTART
RESTART
Meaning
.
AC
KVO
Alaris
Response
CONFIRM
Press soft key.
None
RESTART
Press key, or press
CHANNEL SELECT
START
soft key.
Set up a new infusion or press
CHANNEL OFF
key.
Set up a new infusion or press
CHANNEL OFF
key.
If appropriate, deactivate Tamper
Resist feature using Tamper Resist
Control on back of PC Unit.
None.
To resume infusion, press
RESTART
key, or press
SELECT
key and then
key.
CONFIRM
Press soft key.
® System (with v9 Model 8000) DFU
Pump and Syringe Modules Section
key and then
CHANNEL
START
soft