Secondary Infusion - Cardinal Health Alaris Directions For Use Manual

To start a secondary infusion while a primary infusion is in
progress:
1. To scan bar code on
key on Auto-ID Module or scan trigger on hand-held
scanner.
2. Press
CHANNEL SELECT
• Primary infusion parameters display.
3. Press
SECONDARY
4. Program secondary infusion (see Pump Module Section of
this DFU).
®
Alaris System (with v9 Model 8000) DFU
Auto-ID Module Section

Secondary Infusion

container, press
IV
key on appropriate module.
soft key.
/
SCAN CANCEL
CAUTIONS
•
CLASS 1 LED PRODUCT
stare into the beam or allow beam
to strike patient's face.
• Always verify that information
displayed on the PC Unit matches
scanned data.
: Do not
6-7
Programming