Authorized User Mode - Cardinal Health Alaris Directions For Use Manual

Authorized User Mode is a feature that combines the PC Unit
tamper resist feature with the Auto-ID application. This feature
is designed to ensure that only clinicians with a bar code on
their badge can program the Alaris
ID
When this feature is enabled, the PC Unit automatically
enables tamper resist mode upon power on and
after programming is completed. To unlock the keypad, the
user must scan their
manually input their
To power on the PC Unit with Authorized User Mode enabled:
1. Power on system and associate patient
Identification" procedure).
• Upon successful entry of patient
automatically enables tamper resist feature.
2. To disable tamper resist, press
clinician badge.
ID
3. Program infusion.
• When no keys have been pressed on PC Unit for a
five-minute period, tamper resist mode is automatically
enabled.
NOTES:
In a very low battery condition, with less than
of battery time remaining, the scanner is disabled. In this
situation, disable tamper resist by pressing the Tamper Resist
Switch on the back of the PC Unit for
The Authorized User Mode is only enabled if the feature
is enabled in the selected profile and if there is an Auto-ID
Module attached to the PC Unit.
If the system is configured to do so, it is possible to disable
the Authorized User Mode without scanning a clinician's
press and hold the Tamper Resist Switch (on back of PC Unit)
for - seconds.
3 4
When a questionable bar code is scanned at the main screen
and the panel is unlocked, a prompt to confirm the type of bar
code scanned appears. This occurs whether the Authorized
User Mode is enabled or disabled.
®
Alaris System (with v9 Model 8000) DFU
Auto-ID Module Section

Authorized User Mode

®
System.
badge or use the
ID
number.
ID
SCAN
minutes
5
menu to
OPTIONS
(see "Patient
ID
, PC Unit
ID
key and scan
minutes
5
seconds.
2
;
ID
6-5
Programming