Cardinal Health Alaris Directions For Use Manual page 135

Volume/Duration Enabled (Continued)
9. To see detail screen during or between infusions, press
CHANNEL SELECT
During infusion, Volume Remaining displays.
•
• Between infusions:
♦ Number of doses completed and when next dose
starts display.
♦
Yellow Standby Status Indicator illuminates.
NOTES:
If the current time has been previously confirmed, the Time of
Day screen is not displayed.
RATE
is calculated with each keystroke for
See "Delay Options" procedure to program an infusion delay.
When delaying an infusion, a multidose cannot be delayed
for more than hours, and all doses in the multidose program
8
must be completed within a
Syringe Module: If
message appears near the end of the last dose.
Syringe Module: Starting the infusion before attaching the
administration set to the patient minimizes any potential bolus
that can be released from pressure built up in the set due to
normal syringe loading and priming.
Volume/Duration Disabled
1. To enter rate, use numeric data entry keys.
2. To enter volume to be infused for each dose, press
VOLUME/DOSE
soft key and use numeric data entry keys.
3. To enter time interval (
DOSE INTERVAL
keys.
4. To enter number of doses, press
use numeric data entry keys.
• If Delay Options is enabled,
appears.
®
Alaris System (with v9 Model 8000) DFU
Pump and Syringe Modules Section
Multidose Mode (Continued)
key.
-hour program.
24
is enabled, the Near End of infusion
NEOI
to hours) between doses, press
1 24
soft key and use numeric data entry
# OF DOSES
DELAY OPTIONS
DURATION
.
soft key and
soft key
FU
FU
RATE (mL/h)
RATE (mL/h)
CHANNEL
SELECT
CHANNEL
SELECT
PAUSE
PAUSE
CHANNEL
OFF
CHANNEL
OFF
RESTART
RESTART
2-71
Programming