Cardinal Health Alaris Directions For Use Manual page 237

Features and Definitions (Continued)
Module Location Enforcement
Near End of Infusion (NEOI)
NEOI Alert
Occlusion Pressure
Operating Modes
Patient History
PCA Dose
®
Alaris System (with v9 Model 8000) DFU
PCA Module Section
Features and Displays (Continued)
Tamper resistant security feature that ensures PCA Module is in
a tamper evident position. When enabled, PCA Module must be
located to direct right of PC Unit to allow programming an infusion.
Allows an alert to be configured to sound anywhere between
5 – 25%
Alert Time can be set to occur when
Downstream occlusion alarm threshold can be set to low, medium,
or high.
Four operating modes are available:
•
PCA
• continuous infusion
•
PCA
• loading dose only
All programming of infusions in each of
using Drug Library as defined by hospital-established best-
practice.
PCA Module records and displays patient history for up to
hours, and may be trended to following intervals:
24
hr,
4- 8
information:
• total demands
• delivered demands
• total drug delivered
• time and date patient history last cleared
• average drug per hour
• total amount of drug delivered via:
Enables a patient to self-administer a bolus infusion to be
delivered at programmed lockout intervals through Dose Request
Cord. When programmed in
infusion resumes following
volume remaining.
only
+ continuous infusion
hr, hr, hr. Patient history includes following trending
12- 24-
–
dose
PCA
continuous infusion
loading dose
bolus dose
of
5 – 25%
modes are completed
4
+continuous mode, continuous
PCA
dose.
PCA
General Information
remains.
VTBI
hr, hr,
1- 2-
3-45