Cardinal Health Alaris Directions For Use Manual page 136

Volume/Duration Disabled (Continued)
5. To begin multidose infusion, press
• Main Display shows remaining
• At completion of a multidose program,
COMPLETE
appears on Main Display.
6. Syringe Module: Attach administration set to patient.
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
7. To see detail screen during or between infusions, press
CHANNEL SELECT
During infusion, Volume Remaining displays.
•
• Between infusions:
♦ Number of doses completed and when next dose
starts displays.
♦ Yellow Standby Status Indicator illuminates.
NOTES:
See "Delay Options" procedure to program an infusion delay.
When delaying an infusion, a multidose cannot be delayed
for more than hours, and all doses in the multidose program
8
must be completed within a
Syringe Module: If
message appears near the end of the last dose.
Syringe Module: Starting the infusion before attaching the
administration set to the patient minimizes any potential bolus
that can be released from pressure built up in the set due to
normal syringe loading and priming.
2-72
Programming
Multidose Mode (Continued)
START
for that dose.
VTBI
key.
-hour program.
24
is enabled, the Near End of infusion
NEOI
soft key.
MULTIDOSE
Alaris
Pump and Syringe Modules Section
FU
FU
RATE (mL/h)
RATE (mL/h)
CHANNEL
SELECT
CHANNEL
SELECT
PAUSE
PAUSE
CHANNEL
OFF
CHANNEL
OFF
RESTART
RESTART
®
System (with v9 Model 8000) DFU